• linked
  • sns01
  • sns02
  • sns03
  • sns04

UV-Plasma Automatic Disinfection Machine

Short Description:

●Rapid disinfection, 30㎡ in 12 minutes

●Air, surface and ground disinfection 99.9999%

●UVC-LED all-round disinfection of the ground and wheels

●Plasma disinfection module, achieving bacteriostasis and multiple protection

●High-intensity amalgam lamp array, maximum lighting intensity 4000μW/cm2 at 1m

●Fully Automatic & Intelligent Control

 


Product Detail

Product Tags

05e1d3d4_00
Shape 7

PRODUCT ADVANTAGES

ARapid disinfection.Completing disinfection of a 30 nf room in 8 minutes. The bactericidal ability reaches 99.99%O

AFreely retractable.After the disinfection machine does not perform the disinfection task or complete the task, the machine will drive the protection mechanism to rotate, so that all the lamps can be rotated into the robot body to protect the ultraviolet lamps.

APPLICATION SCENARIOS

Picutre 9
Picutre 10

Aultra-silent When the disinfector moves automatically, the operating decibel is less than 35dB.When the disinfector disinfects automatically, the working decibel is less than 50dB

ensor.Equipped with 5 living detection sensors, the UV disinfection machine, in the process of disinfection, can identify people or animals into the disinfection range, then immediately suspend disinfection, and turn off the ultraviolet lamp, to prevent harm to people or animals.

Asafety design.There are emergency stop (EMO) buttons both on the top and chassis, which can be used to cut off the working power in any emergency state. There is an ultraviolet lamp power switch under the touch screen on the top. When pressed, the ultraviolet lamp can be disconnected for convenient maintenance and operation.

Asuper endurance, it can realize room disinfection of about 350 m2 for a single charge.Two charging methods: automatic and manual charging. Solving the concern of machine endurance.

AMulti-disinfection.There are 8 high-intensity UVC-LED disinfection lamps at the bottom of the disinfection machine, which can realize multi-disinfection on the ground and the wheels of the machine. Equipped with the plasma disinfection module, it can achieve continuous bacteriostasis and multiple protection under the coexistence of human and machine.

Alntelligent contro Pad control, It can perform authority management, robot operation, recording of disinfection data logging, report output and other operations.

Principle

UVC ultraviolet disinfection products are often used for air disinfection (Viruses, bacteria, or fungi can be spread in the air by breathing, talking, coughing, sneezing, dust, or any activity that produces aerosol solid or liquid particles. Heating, ventilation and air conditioning systems will lead to the further spread of bacteria in the air, serving as the key disinfection areas), surface disinfection (Saliva and droplets are produced when people cough or exhale, most of which fall on nearby surfaces and objects, such as desks or telephones. If they carry viruses, workers may be infected by touching contaminated surfaces or objects and then touching eyes, ears, mouth and nose), and item disinfection (Viruses can survive on object surfaces for up to 5 days, and thus the risk of infection is much higher when contacting daily necessities or shared equipment. Regular disinfection of daily and re-used articles can help to inactivate viruses and bacteria on the object surfaces). The WHO reports that no microbes with UV-C ultraviolet resistance have been found so far.Based on high-intensity UV-C ultraviolet and autonomous mobile robot, as well as combining with the plasma technology, a fast UV-Plasma disinfection robot (AUVP1) will be created. This document mainly introduces the technical R&D requirements of the disinfection robot for the start of this project. 

Feature

1.207W x 10 cps UV-C lamps

2.High-intensity amalgam lamp array, with a wide coverage of effective intensity.

3.The maximum lighting intensity of 4000 μW/cm2 at 1m.

UV-Plasma Automatic Disinfection Machine_06

4.Completing disinfection of a 30㎡ room in 12 minutes.

UV-Plasma Automatic Disinfection Machine_02

5.The disinfection effect is certified by a third-party testing institution.

6.Freely retractable lamp protection design and convenient lamp disassembly.

7.After the disinfection machine does not perform the disinfection task or complete the task, the machine will drive the protection mechanism to rotate, so that all the lamps can be rotated into the robot body to protect the ultraviolet lamps.

8.Autonomous mobile chassis, ultra-silent, ultra-powerful, and ultra-secure.

9.The chassis of disinfection machine can realize autonomous navigation and obstacle avoidance, flexible walking in the room to be disinfected.

10.When the disinfector moves automatically, the operating decibel is less than 35dB.When the disinfector disinfects automatically, the working decibel is less than 50dB.

11.Multi-sensors for security protection.

12.A small step towards smart disinfection.

13.Ultrasonic module sensor, depth camera sensor, laser radar, and safety contact edge sensor.

14.Live sensor, focusing on the safety of disinfection process at any time.

15.Equipped with 5 living detection sensors, the UV disinfection machine, in the process of disinfection, can identify people or animals into the disinfection range, then immediately suspend disinfection, and turn off the ultraviolet lamp, to prevent harm to people or animals.

16.Safe and ubiquitous design.

17.There are emergency stop (EMO) buttons both on the top and chassis, which can be used to cut off the working power in any emergency state.

18.There is an ultraviolet lamp power switch under the touch screen on the top. When pressed, the ultraviolet lamp can be disconnected for convenient maintenance and operation.

19.With surging power and super endurance, continuous disinfection for 2 hours can be realized for a single charge.

20.Equipped with 48V90AH super-capacity lithium battery, it can realize room disinfection of about 350㎡ for a single charge. Meeting single disinfection needs of most customers.

21.Two charging methods: automatic and manual charging. Solving the concern of machine endurance.

22.Multi-disinfection, and all-round protection.

23.There are 8 high-intensity UVC-LED disinfection lamps at the bottom of the disinfection machine, which can realize multi-disinfection on the ground and the wheels of the machine.

UV-Plasma Automatic Disinfection Machine_04

24.Equipped with the plasma disinfection module, it can achieve continuous bacteriostasis and multiple protection under the coexistence of human and machine.

UV-Plasma Automatic Disinfection Machine_05

25.Intelligent control, go-as-you-please.

26.8-inch Pad control, and perfect APP design. It can perform authority management, robot operation, recording of disinfection data logging, report output and other operations.

UV-Plasma Automatic Disinfection Machine_07

Parameter

Ultraviolet band Ultraviolet sterilization with wavelength of 254nm can effectively cut off the DNA or RNA of microbes, and inhibit their regeneration, so as to achieve disinfection and sterilization.
Chassis disinfection There are a number of high-intensity UVC-LED disinfection lamps at the bottom of the disinfection machine, which can realize multi-disinfection on the ground and the wheels of the machine.
Sterilization ability Air disinfection 99.9999%, surface disinfection 99.9999%, and ground disinfection 99.9999%.
Disinfection method 10 high-power sterilization lamps. Its automatic disinfection can achieve 360° full coverage without shadow, ensuring a high-level disinfection in the environment.
Disinfection speed With high-power and rapid disinfection, it can complete disinfection of a 30㎡ room in 12 minutes.
Lithium battery power supply, with continuous disinfection for 2 hours of a single charge.
Manual/automatic charging
Safety-related Once living organisms are detected in the disinfection area, disinfection will be stopped.
The robot has sensors, including ultrasonic module sensor, depth camera sensor, laser radar, and safety contact edge sensor.
Several safety switches
The lamp can be automatically stored to prevent external impact.
Multi-level lamp control switches
Operation Pad control 
UV-Plasma Automatic Disinfection Machine_03

Application scenarios

Hospitals : operating room, consulting room, negative pressure ward, drug changing room, etc.

application
application2

  • Previous:
  • Next:

  • Write your message here and send it to us